# Deploying Apostrophe in the Cloud with Heroku
There are many cloud hosting services, but they all present the same challenges. Separate servers often don't share a single filesystem. The database usually needs its own scalable cloud hosting. And performing tasks like minifying assets is often best done in your development environment, minimizing what has to be done in production.
"The cloud" isn't always the easiest solution to your problem. Take a look at our Linode HOWTO for a quicker way that is suitable for all but the highest-traffic sites.
# Deploying Apostrophe to Heroku
Heroku (opens new window) is a great starting point for cloud hosting because it is simple to set up, but all of the cloud's challenges come into play. What we learn by deploying to Heroku can be applied equally to Amazon EC2, Microsoft Azure and other cloud hosting services.
So for this how-to, we'll stick to free services from Amazon Web Services, Heroku and MongoDB Atlas, a MongoDB cloud hosting service from the creators of MongoDB. But keep in mind you can choose paid plans as well with much higher capacity and performance. Everything we've done here is designed to scale smoothly to those paid offerings.
# Before you begin
First, build an Apostrophe site! See the getting started tutorial.
Make sure you commit it to a git repository. git is a big part of how Heroku deploys websites.
# First steps with Heroku
Next, create an account at heroku.com (opens new window).
Then create a Heroku app, choosing any app name and runtime location (US, Europe, etc.) you wish.
Now, following the instructions on the Heroku site, install the Heroku CLI (opens new window) if you haven't already.
To enable deployment, add Heroku as a "git remote" to which your code can be pushed:
heroku git:remote -a apostrophetest (use YOUR app name)
Now we're almost ready to deploy. But, we need a database.
Heroku runs our node app, but it doesn't run MongoDB for us. So let's go to MongoDB Atlas (opens new window) and sign up.
After you sign up, click "Build a New Cluster." Pick "AWS" as your cloud provider and the same region you chose for Beanstalk. Do not shard your cluster, sharding is not appropriate for CMS work.
We recommend you give your cluster the same name as your project.
You will need to set up an administrative MongoDB user for your cluster. These will be part of your MongoDB database connection credentials. Be sure to set a secure, separate username and password, do not use your Atlas login credentials.
# IP address whitelisting
MongoDB Atlas requires us to whitelist the IP addresses that should be allowed to talk to the database. Yes, it is secured by an encrypted password, but this still helps cut down on potential DOS attacks.
This is a problem with Heroku because it may connect from many IP addresses.
If you are buying a larger Atlas plan you may be able to use the "VPC Peering" option, the details of which are beyond the scope of this HOWTO. Otherwise, just click "Allow Access from Anywhere" or, if you don't see that option, use this IP address range:
# Telling Heroku about your database
You will need to set an environment variable in Heroku so that your dynos understand where the datbase is. There's a UI for this, but the command line is much easier in the long run:
heroku config:set 'APOS_MONGODB_URI=mongodb://YOUR-uri-goes-here'
We use the single quotes to avoid problems with most special characters in the URI. If you used the
' character in the URI, you'll need to escape that with
From here, you can test your site locally. This is typically done with:
npm install npm run start
You should be able to view your website at the designated local port.
You can also test it without Heroku, on your local machine, by setting the environment variable just for one local run of your site:
APOS_MONGODB_URI=mongodb://YOUR-uri-goes-here node app
Press Control-C after you successfully test the site. Startup may take an extra moment because of the remote connection to MongoDB.
At a small scale, "the cloud" is always slower than a single-server configuration. When things have to talk to each other, running them farther apart doesn't speed things up. However, after you reach a certain scale, a single server is impractical. And of course a single server is a single point of failure.
If you do not run
node appwith the environment variable set correctly, it'll seem to work because it will connect to your own mongodb. You can shut down your local mongodb server temporarily if you want to be really, really sure.
- Your database exists now on MongoDB, but it contains no users, so you won't be able to log in. Let's use the command line to connect again to fix that:
APOS_MONGODB_URI=mongodb://YOUR-uri-goes-here node app apostrophe-users:add admin admin
This is the same user-creation command you saw in our getting-started tutorial. We're just talking to a different database.
You could also create your database locally and then copy it to MongoDB using the
# Storing files with Amazon S3
If you try to deploy now it might seem to work... but don't be fooled! If you upload images, and then redeploy later, or even just wait a day or so... forget it. They are gone forever. That's because, with Heroku, local files are "written on water." What's more, on any given page load you might not even hit the same dyno where the files were uploaded. And similar issues will break your static assets, like CSS and JS.
So we need to use Amazon S3 for persistent storage of both uploads and static assets.
First, log into the Amazon Web Services console (opens new window). Create an account if you haven't already. You may have to provide a credit card but as of this writing, you can complete this how-to using their free service tier.
From the Amazon Web Services control panel, click on S3. Then click "Create Bucket."
Choose a bucket name (the same as your app is nice but not mandatory) and a region (we recommend you not use "US Standard" because it does not have read-after-write semantics). Then click "Create."
Now test it without Heroku, on your local machine, by setting the environment variables just for one run of your site (the trailing
\ characters are there to allow us to break one command line over multiple lines for readability in the
APOS_S3_BUCKET=YOUR-bucket-name \ APOS_S3_SECRET=YOUR-s3-secret \ APOS_S3_KEY=YOUR-s3-key \ APOS_S3_REGION=YOUR-chosen-region \ node app
APOS_S3_REGION setting: you'll need to look this up in the AWS regions table (opens new window) (it's halfway down the page, "Amazon API Gateway"). Use the value in the "Region" column corresponding to the "Region Name" you chose.
Upload an image to your site, then right-click it and inspect the image URL. It should be on an Amazon S3 server at this point, not localhost.
"What if I want to use an S3-compatible service that isn't run by Amazon?" You can set the
APOS_S3_ENDPOINTvariable to a complete hostname. If you do, you should not set
# Adding the S3 variables to Heroku
heroku config:set again:
heroku config:set APOS_S3_BUCKET=YOUR-bucket-name heroku config:set APOS_S3_SECRET=YOUR-s3-secret heroku config:set APOS_S3_KEY=YOUR-s3-key heroku config:set APOS_S3_REGION=YOUR-chosen-region
# Minifying assets
Apostrophe generates minified files with the
apostrophe:generation task. For simple single-server deployments we usually just run
apostrophe:generation in production, but this doesn't work for Heroku because every "dyno" in Heroku gets its own, temporary local files and we want every dyno to see copies of the same exact assets. You'll encounter the same issue with most other cloud hosting services.
So we'll build an "asset bundle" and store it temporarily in the database, where all dynos will be able to see it.
To do that, first, you must set
APOS_BUNDLE=1 in your Heroku environment settings:
heroku config:set 'APOS_BUNDLE=1'
And, you need to turn on minification of assets:
heroku config:set 'APOS_MINIFY=1'
IMPORTANT: the APOS_MINIFY environment variable is OVERRIDDEN by any setting you may have made for the
minifyoption when configuring the
apostrophe-assetsmodule. If you want to use the environment variable, DO NOT also set the option in your code.
Third, you must create a release tasks script in your project, and a Heroku Procfile telling Heroku to run it.
Here is a sample
Procfile, which should be in the home directory of your project:
web: node app release: ./scripts/heroku-release-tasks
And in the
./scripts subdirectory of your project, here is a sample
#!/bin/bash node app apostrophe:generation || exit 1 node app apostrophe-migrations:migrate || exit 1
Be sure to make that script executable before committing it in your project:
chmod u+x ./scripts/release-tasks
This script will take care of both static asset generation and database migrations just before Heroku starts launching dynos with the latest version of your code.
With these things in place, Apostrophe will minify assets and copy them to its database just before it launches dynos. Each dyno will be able to see the asset bundle and copy its contents to its temporary filesystem, so everyone sees the same files.
"Why does Apostrophe need to unpack assets each time a dyno starts up?" Remember, every dyno in Heroku gets its own completely temporary and separate set of local files. Heroku deploys from git, but we don't want to use minified files all the time in dev. In dev we also benefit from using live symbolic links to the asset folders of modules; but in production we want copies, for speed. The bundle strategy lets us keep the production assets in git without actually cluttering up the dev environment.
We're ready to deploy to Heroku!
# Deploying to Heroku
Everything is in readiness! Commit your code changes, then type:
git push heroku
To push your latest code from your active git branch up to heroku. Heroku will then start installing your dependencies via
npm install, and you'll see the progress right in the output of the
git push heroku command.
At the end you'll see a message like this:
remote: -----> Launching... remote: Released v3 remote: https://apostrophetest.herokuapp.com/ deployed to Heroku
Now just visit:
And log in.
# If it doesn't work
If your deployment fails, type
heroku logs to see what went wrong.
If your images don't "stick" between restarts, you probably skipped the Amazon S3 steps.
APOS_BUNDLE variables but never created the
Procfile or the release tasks script. Also check the heroku logs for errors from the release tasks script.
# Fonts, other assets, and CORS errors in the browser console
To ensure there are no CORS (Cross-Origin Resource) errors, visit your amazon S3 bucket settings to adjust the CORS configuration:
Amazon S3 → [bucket] → Permissions Tab → CORS configuration button
Verify the value of
AllowedOrigin. It should match the heroku url and/or the production URL of your project:
# Efficient asset delivery
In this setup, images are delivered efficiently via S3, and everyone can see all of the assets. And so are static assets like CSS and JS. Those are copied to S3 during the release task. Old assets are cleaned up one hour after each new deployment, allowing a very generous period of time for any old Heroku dynos to shut down automatically.
To ensure the contents of the bundle's
data/subdirectory are still available, and to provide backwards compatibility for any URLs you have hard-coded in your templates that are not aware that the relevant contents of
public/have been copied to S3, the assets are also extracted to the application's folder on Heroku. Apostrophe, however, will consistently reference the contents via S3 URLs instead.